Can you send repair instructions for rebuild kits? I need to repair VEPHD connects on a Prinoth Snow Cat. I have the repair kits, male and female, and want to know the proper replacement method before I disassemble the fitting.

Can you tell me more about how the GR multi-coupling plate works and if it could help my application?

Can your multi-coupling plates be used on steel dies to improve tool changeover time in die casting?

Can your multicoupling plates accommodate water, pneumatic, power, and signal connections?

Do you have a cross from Eaton couplers to Stucchi?

Do you have a PPC with breakaway capabilities rated for argon gas? I’d like to improve an existing hose connection system for a liquid argon connection used in a steel mill tundish purge. We purge hot tundish with liquid argon to reduce nitrogen and hydrogen pickup.

Do you have a quick coupler that can connect fairly easily with pressure on both sides?

Do you have a replacement quick coupler for a Faster coupler with item #38SAE12EO 2FFI14?

Do you have a solution to quick connect hydraulic tools and attachments under residual pressure?

Do you have a specialty replacement coupler that drains residual pressure before connecting?

Do you have couplers compatible with brand name equipment such as John Deere, Caterpillar and ?

Do you have quick coupler dust caps and accessories?

Do you have quick couplers for tractors and skid steer loaders?

Do you have quick disconnects for an offshore hydraulic power unit with stainless steel, plating or a marine coating?

Do you offer a quick-connect / quick-release solution to facilitate a fast and leak-free disassembly of crawler cranes?

Do you offer assistance in selecting the best quick coupling material to withstand highly corrosive environments?

Do you offer hydraulic quick couplers that support Aerospace Ground Service Equipment?

Do you offer quick couplers for high pressure applications?

Do you provide an easier and more efficient solution to quick connect couplings on a wheel loader?

Do you sell an O-ring seal kit?

Does QPQ technology provide resistance to corrosion ?

How do I mount the DP multi-coupling plate? Do both ends need to be rigidly mounted? And what is the expected life-cycle with up to 50 couplings per day?

I am a hydraulic design engineer for John Deere skid steers and compact tracked loaders. I’d like to know if you can provide samples/prototype parts of the Saturn block with FIRG couplers.

I am in need of a manifold system with sixteen 3/8” ports and several other manifold systems with various dimensions.

I am inquiring about an application for the GR Plate Series Multi-coupling plate with the following requirements: (4) 1-1/4" flow coupling (2) 1" flow coupling (3) 3/8" flow coupling. We would require (1) stationary plate and (2) mobile plates with above connections, with maximum pressure 350 psi.

I am looking for ¾ flat faced couplers to replace the 5/8 flat faced couplers on my 2016 Bobcat T870, running a high flow forestry mulcher.

I am looking for a screw in type fitting for my Takeuchi TL12. I have multiple high flow attachments such as a a Prinoth cutter head and a Virnig V70 disc mower and a Virnig V60 high flow bush hog and I need to be able to use all of them.

I am looking for some information on your VEPHD SERIES hydraulic couplers. I have a case 1845c and was wondering if the VEPHD would work on my model skid steer?

I am looking to change our 9 individual lines and couplers to a GR Multi-coupling plate series to have a single disconnection point. We need to connect 9 hoses of mixed fluid, air and N2 gases. Can you quote me for a 9-line system with all 3/8" ?

I am trying to find the male fitting that connects to the Stucchi FIRG34 that is on my Bobcat, model 873.

I have a new Bobcat E20 excavator. The quick connect for the thumb, auger and tilt bucket are hard to get on. I think I need the APM13 by3/4. Do you know if this is right?

I need a durable quick coupler for a demolition job that has to endure days of heavy hammering without fail. Do you have a heavy duty coupler that I can rely on to last on heavy excavation work?

I need a quick coupler to hold up to severe pressure impulses and hose rotation in heavy duty applications.

I need a quick disconnect system for the aerospace industry that can connect/disconnect at up to 3000 psi. We need a compact solution, 1/8” to 1/4” preferred, NPT female with bulkhead mount, NPT male in-line, NPT female in-line.

I need brand couplers that are not available from the dealer. Do you have quick couplers compatible with brand name equipment?

I need quick couplers and pricing for 1" and 1 ½" quick disconnect for 2500# hydraulic oil. These will be on offshore equipment, not in direct contact with sea water but still need corrosion resistance.

I need replacement couplers for older machinery. Do you have replacement, specialty or custom quick couplers to replace hydraulic couplings on legacy equipment?

I noticed an item in the Stucchi catalog- is it available in stainless steel?

I plan to use my tractor for heavy construction work, changing the standard flow to high flow. Do I need to upgrade my quick couplers too?

I want to replace all the fittings on my John Deere 333G including the mulching head attachment.

I would like to develop a quick connect for use in an automated process with 2 ports. One electrical connection + 1 water connection 100 psi. I would like to know if you would be ready to construct this quick connect. We will need 1380 units.

I would like to inquire about a 4 port quick connect coupler for my John Deere 1025r tractor. Will your product work on the r120 front loader that I have?

I’m having trouble connecting my . I am not sure why they are so difficult to connect?

I’m looking for a high flow quick connect to drain crude oil. We need high flow to allow sediment to pass through without getting gummed up or stuck open with minimal spillage as they will be used outside in wind conditions.

I’m looking for a Low Pressure Drop 1/2" Quick Disconnect, it is not required to be flat face or connect under pressure. Will you please suggest my best options?

I’m looking for a quick coupler equivalent to the Parker-Hannifin SM-251-6F0, SM series.

I’m looking for a quick coupling that can safely be used with an operator close by – something that cannot be accidentally disconnected as that would be a safety concern for the operator.

I’m looking for screw couplers for my Bobcat T870. I run a forestry mulcher attachment on my skid steer and my couplers do not last long before they start leaking oil.

I’m wondering if you have a cross to the Stucchi part number for Parker# FEM-501-12FP-NL or Holmbury# FF08N34F.

I’ve heard that Stucchi couplers are solving mulching problems with a Kubota. What couplers do you suggest for a Kubota SVL95-2 high flow with a mulcher?

Is it possible to put new O-ring in a VEP coupler, and what is the main cause of failure on the female end?

Is Stucchi able to cross-match TEMA couplers?

Is there a simple explanation for why I cannot seem to disconnect my flat face couplers?

Looking for a male/female set of flat faced stainless steel hydraulic couplings in 1” BSPT or NPT and 3/4” BSPT.

My flat face coupler is leaking and I’m not sure how to tell where it’s leaking from or how to fix it?

We are an equipment manufacturer and distributor and would like to purchase the APM couplers or the preferred solution for residual pressure applications.

We are building a Launch Pad to interface with a rocket from a rocket lab. We must install the same Dry Break that is currently used which is a: Stucchi 6025 1" BSPP, flat face drybreak. We would prefer SAE not BHPP.

We are currently using on a hydraulic breaker and after a short amount of time, the two halves become locked together and need to be replaced. Is there a different product better suited for our application?

We are currently using poppet style couplers on our snow removal equipment and often experience water freezing in the couplers when left out all night and oil spillage on disconnection. Do you have a better option for a small fleet of plow trucks?

We are having an issue with the GR series multi-couplers experiencing corrosion in a very high (100%) humidity environment used for mining applications. Do you have a better option with corrosion resistant couplers that will maintain a tight seal?

We have a John Deere 200 excavator and are looking for suggestions to use a hydraulic thumb with a bucket?

We operate a fleet of snow plows, some with side plows and spreaders, and need a better way to connect and disconnect hydraulic lines faster without spilling hydraulic fluid.

What is stainless steel?

What is the AISI standard?

What is the best method for cleaning flat face couplers prior to connecting? Is it wiping or spraying? If spraying, what type of spray product is best?

What is the difference between stainless steel and ?

What is the salt spray test and do you have couplers to meet this standard?

What is the volume rating for the VEP15P and VEP17P?

What is your lead time on the GRE Series multi-coupling?

What seal options are available for the A-Premier Series and do you have temperature ratings?

What types of multi-coupling plates do you offer?

What types of poppet quick coupler interchange products do you offer?

What types of threaded poppet couplers do you offer?

What’s the advantage of O-ring seals?

Where can I purchase a repair kit: 815700001 KIT M. FIRG 14?

Which couplers would work best for a Kubota SVL95-2s High Flow running a Denis Cimaf 180D mulching head?

Knowledge Base

Industries: +

Product Body Size +

Product Material +

Product Port Options +

Product Port Size +

Product Valve Style +

Product Working Pressure +

Case Studies

Customer Service

Ordering Information

Product Information

Specifications

Videos

Whitepapers