5/8"

Showing 1–12 of 14 results

  • a premier flat face coupler

    A-PREMIER INTERNATIONAL SERIES

    The A Premier International Series offers the same higher pressure ratings, superior flow characteristics, and lower pressure drop features and benefits as the A Premier series, with convenient international BSP British or German DIN port configurations. Specifically designed for applications needing no-leak performance and the ideal solution for limiting contamination in hydraulic circuits,the non-spill design avoids fluid loss during connection and disconnection. We also have our standard A-Premier series with NPT, SAE, JIC, and ORFS port connections.

    Read more
  • a premier flat face coupler

    A-PREMIER SERIES

    The A Premier Series Flat Face ISO 16028 Interchange Couplings offer higher pressure ratings, superior flow characteristics, and lower pressure drops compared to FIRG Series or competitors’ products. Specifically designed for applications needing no-leak performance and the ideal solution for limiting contamination in hydraulic circuits, the non-spill design avoids fluid loss during connection and disconnection. The A Premier is also available in an international version, with British BSP or German DIN port options.

    Read more
  • A-ZN SERIES

    The A-ZN Series Flat Face Couplings utilize specialized plating for high corrosion resistance, designed to exceed the ISO salt spray test. Standard zinc plating is rated for 400 hours before red spotting. The Z version offers higher pressure and superior flow ratings with a lower pressure drop compared to competitors’ products. The ZN version plating is designed to exceed 1000 hours before the appearance of red spotting in the same ISO salt spray test.

    Read more
  • APM SERIES

    The APM Series Flat Face Couplings are state-of-the-art solutions for high residual pressure. They address residual pressure in a circuit anywhere thermal expansion of trapped fluid causes pressure to develop, and connect by hand with residual pressure, without releasing any fluid into the environment. The APM is intended to relieve pressure within itself only.

    Stucchi APM Series from Stucchi USA on Vimeo.

    Read more
  • CUSTOM PLATE COUPLERS

    Whether you are refurbishing your entire plant or simply replacing legacy couplers, our custom plate couplers meet your needs—and are designed to your exact specifications. Eliminate crossing of lines, expensive leaks and downtime, with custom plate couplers that perform consistently in a rigorous environment.

    Read more
  • DP PLATE SERIES

    The DP Series of Multi-Coupling Plates allows the simultaneous couple and uncouple of two to four hydraulic and/or electrical lines with a single, simple movement requiring very little force. The circuit lines can all have the same coupler nominal diameter and different media. A dust cap is supplied, and options include: an electrical connector for low voltage requirements and a parking station.

    Read more
  • Dust Caps & Repair Kits

    Protective caps and plugs are useful accessories that prevent damaging dust, water or mud from entering the quick couplings, thus lengthening their working lives. Repair kits are available upon request.

    Read more
  • FIRG SERIES

    The FIRG Flat Face Series, the original ISO 16028 interchangeable coupling, continues to offer good performance, long life and competitive pricing. The integrated sealing mechanism greatly reduces premature wear caused by movement between coupler and nipple parts affected by impulse pressure and the weight of the hoses and tubing when the coupling is in horizontal position.

    Read more
  • FIRGQ SERIES – QPQ PLATING

    The FIRGQ Series Flat Face Couplings utilizing QPQ plating technology for a corrosion resistant finish that is superior to zinc plating in many environments. It is a low-cost alternative to cost-prohibitive stainless steel applications and can be supplied with a variety of seals for fluid compatibility and operating temperature requirements.

    Read more
  • FL SERIES

    The FL Series Flat Face Couplings are designed with high corrosion resistance and excellent fatigue life. The FL couplings are manufactured in 316 stainless steel to eliminate leakage during connection/disconnection, reduce contamination in the circuit, and offer optimal resistance to corrosion. Standard seals are Viton/Fluorocarbon; other materials available for various fluids and operating temperatures.

    Read more
  • GR PLATE SERIES

    The GR Series of Multi-Coupling Plates allows the simultaneous couple and uncouple of two to ten hydraulic and/or electrical lines with a single, simple movement requiring very little force. The circuit lines can all have the same nominal coupler diameter and different media or different size couplers. A dust cap is supplied, and options include: an electrical connector for low voltage requirements and a parking station.

    Read more
  • I-IP SERIES

    The I-IP Series is an extension of ISO A style couplings, popular worldwide for its versatile interchangeability. This ISO interchange coupler features a push pull mounting feature and a nipple with a modular port design that allows for a range of port options.

    Read more